Dell POWEREDGE M1000E - Manual (Page 758)

682 Fabric OS Message Reference
53-1001767-01
AUTH-3008
114
Probable Cause Indicates that the specified port was disabled due to receiving an authentication reject response
from the connected switch/device.
The error might indicate that an invalid entity attempted to connect to the switch.
Recommended
Action
Check the connection port for a possible security attack.
Check the shared secrets using the secAuthSecret command and reinitialize authentication using
the portDisable and portEnable commands.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity INFO
AUTH-3008
Message
AUDIT, , [AUTH-3008], INFO, SECURITY, ,
, , Event: , Status: failed, Info: Port
has been disabled due to authentication failure with code '' and
explanation ''.
Probable Cause Indicates that the specified port has been disabled, because the connecting switch/device failed to
authenticate.
The error might indicate that an invalid entity attempted to connect to the switch.
Recommended
Action
Check the connection port for a possible security attack.
Check the shared secrets using the secAuthSecret command and reinitialize authentication using
the portDisable and portEnable commands.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity INFO