Dell POWEREDGE M1000E - Manual (Page 357)

Fabric OS Message Reference 281
53-1001767-01
Chapter
40
FSS System Messages
FSS-1001
Message
, [FSS-1001], , SLOT cp-slot-number | CHASSIS,
WARNING, , Component () dropping HA data update
().
Probable Cause Indicates that an application has dropped a high availability (HA) data update.
Recommended
Action
Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed
system.
If the message persists, run the supportFtp (as needed) to set up automatic FTP transfers; then run
the supportSave command and contact your switch service provider.
Severity WARNING
FSS-1002
Message
, [FSS-1002], , SLOT cp-slot-number | CHASSIS,
WARNING, , Component () sending too many concurrent
HA data update transactions ()
Probable Cause Indicates that an application has sent too many concurrent high availability (HA) data updates.
Recommended
Action
Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed
system.
If the message persists, run the supportFtp (as needed) to set up automatic FTP transfers; then run
the supportSave command and contact your switch service provider.
Severity WARNING
FSS-1003
Message
, [FSS-1003], , SLOT cp-slot-number | CHASSIS,
WARNING, , Component () misused the update
transaction () without marking the transaction beginning.
Probable Cause Indicates that the Fabric OS state synchronization (FSS) service has dropped the update because
an application has not set the transaction flag correctly.
Recommended
Action
Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed
system.