Dell POWEREDGE M1000E - Manual (Page 327)

Fabric OS Message Reference 251
53-1001767-01
FICN-1042
35
Probable Cause Indicates an LRJ received from a device indicates that the CU has lost the logical path to the LPAR.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
Severity ERROR
FICN-1042
Message
, [FICN-1042], ,, WARNING, ,
HostTapeIng:FICON Cancel received Path=
DeviceDomain> state=0x
state for this device>.
Probable Cause Indicates a job was cancelled during a write pipelining.
Recommended
Action
If this was an unexpected event (cancel is normally an operator event), contact your vendor's
customer support for assistance.
Severity WARNING
FICN-1043
Message
, [FICN-1043], ,, ERROR, ,
HostTapeIng::FICON Selective Reset:Path=
DeviceDomain> state=0x
state for this device> LastCmds=0x
for this device> LastStatus=0x
for this device>.
Probable Cause Indicates that protocol errors in emulation in the CU or network errors can cause a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
Severity ERROR
FICN-1044
Message
, [FICN-1044], ,, ERROR, ,
HostTapeIng:FICON Selective Reset:Path=
DeviceDomain> Elapsed Time=
seconds since the last IO started for this device>.
since the last IO started for this device> seconds.
Probable Cause Indicates that protocol errors in emulation in the CU or network errors can cause Selective Reset.
Recommended
Action
If this was an unexpected event, please contact your vendor's customer support for assistance.
Severity ERROR