Bl-1017, Bl-1018, Bl-1019 – Dell POWEREDGE M1000E User Manual
Page 141
Fabric OS Message Reference
65
53-1001767-01
BL-1017
7
Run the systemVerification command to verify that the blade does not have hardware problems. To
run this command root access is required. Run the diagPost command to ensure that Power-On
Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more information on
these commands.
If the message persists, replace the blade.
Severity
CRITICAL
BL-1017
Message
number> Initializing... Probable Cause Indicates that the slot has started initializing the ports. Recommended Action No action is required. Severity INFO BL-1018 Message number> Initialization completed. Probable Cause Indicates that the slot has completed initializing the ports. Recommended Action No action is required. Severity INFO BL-1019 Message number>, retry internal ports retrying initialization>. Probable Cause Indicates that the slot had internal ports not online and that the system is retrying to bring the Recommended Action No action is required. Severity INFO
ports that failed back online.