Motorola ColdFire MCF5281 - Manual (Page 748)

Revision History
B-12 Freescale Semiconductor
Section
33.13.2/Page
33-22
Remove second sentence:
“There is no minimum frequency requirement.”
Remove second paragraph as this feature is not supported on this device:
“The transmit outputs (ETXD[3:0], ETXEN, ETXER) can be programmed to transition from either
the rising or falling edge of ETXCLK, and the timing is the same in either case. This options
allows the use of non-compliant MII PHYs. Refer to the Ethernet chapter for details of this option
and how to enable it.”
Table A-3/Page
A-4
The CSMR1 and CSCR1 register addresses are incorrect. They should be IPSBAR + 0x090 and
IPSBAR + 0x096 respectively
Table B-7. Rev. 2.3 to Rev. 3 Changes (continued)
Location Description
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3