Accton Technology ES4626 - Manual (Page 95)

95
（ 2）Obtain system file nos.img from the TFTP server 2004:1:2:3::6
Switch#copy tftp:// 2004:1:2:3::6/nos.img nos.img
（ 3）Save running configuration files
Switch#copy running-config startup-config
2.5.3.2.2.3 dir
Command: dir
Function:
Browse the file list on the FTP server.
Parameter ： The form of < ftp-server-url > is ：
ftp://:@{<ipv4address>|},amongst is
the FTP user name, is the FTP user password,
{<ipv4address>|} is the IPv4 or IPv6 address of the FTP server.
Command Mode: Global Mode
Example: Browse the list of the files on the server with the FTP client
Switch(Config)# dir ftp://user:password@IPv6 Address.
2.5.3.2.2.4 ftp-server enable
Command: ftp-server enable
no ftp-server enable
Function: Start FTP server, the “no ftp-server enable” command shuts down FTP
server and prevents FTP user from logging in.
Default:
FTP server is not started by default.
Command mode: Global Mode
Usage Guide: When FTP server function is enabled, the switch can still perform ftp client
functions. FTP server is not started by default.
Example: enable FTP server service.
Switch#config
Switch(Config)# ftp-server enable
2.5.3.2.2.5 ftp-server timeout
Command: ftp-server timeout <seconds>
Function: Set data connection idle time
Parameter: < seconds> is the idle time threshold ( in seconds) for FTP connection, the
valid range is 5 to 3600.
Default: The system default is 600 seconds.
Command mode: Global Mode
Usage Guide: When FTP data connection idle time exceeds this limit, the FTP