Accton Technology ES4626 - Manual (Page 817)

817
Function : Displays status and configuration information for the VRRP standby cluster.
Command mode
: All Modes
Example:
Switch# show vrrp
VrId <1>
State is Initialize
Virtual IP is 10.1.20.10 (Not IP owner)
Interface is Vlan2
Priority is 100
Advertisement interval is 1 sec
Preempt mode is TRUE
VrId <10>
State is Initialize
Virtual IP is 10.1.10.1 (IP owner)
Interface is Vlan1
Configured priority is 255, Current priority is 255
Advertisement interval is 1 sec
Preempt mode is TRUE
Circuit failover interface Vlan1, Priority Delta 10, Status UP
Displayed information Explanation
State Status
Virtual IP Dummy IP address
Interface Interface Name
Priority Priority
Advertisement interval Timer interval
Preempt Preemptive mode
Circuit failover interface Interface Monitor information
20.3.11 virtual-ip
Commands: virtual-ip <A.B.C.D>
no virtual-ip
Function : Configures the VRRP dummy IP address
Parameters:
<A.B.C.D> is the IP address in decimal format.
Default : Not configured by default.
Command mode : VRRP protocol configuration mode