Accton Technology ES4626 - Manual (Page 826)

826
restore after a while. For the normal data VLAN, the network maybe forms a temporary
ring and creates broadcast storm. To avoid temporary ring, transfer node finds it to
connect to ring network port to refresh UP, immediately block temporarily (only permit
control VLAN packet pass), after only receiving LINK-UP-FLUSH-FDB packet from
primary node, and releases the port block state.
21.2 MRPP Configuration Task List
1) Globally enable MRPP
2) Configure MRPP ring
3) Display and debug MRPP relevant information
1) Globally enable MRPP
Command
Explanation
Global Mode
MRPP enable
no MRPP enable
Globally enable and disable
2) Configure MRPP ring
Command Explanation
Global Mode
MRPP ring
no MRPP ring
Create MRPP ring. format “no” deletes
MRPP ring and its configuration
MRPP ring mode
Control-vlan
No Control-vlan
Configure control VLAN ID, format “no”
deletes configured control VLAN ID.
Primary-port Ethernet IFNAME Specify primary port of MRPP ring
Secondary-port Ethernet IFNAME Specify secondary port of MRPP ring
Node-mode {master | transit}
Configure node type of MRPP ring
(primary node or secondary node)
Hello-timer
No hello-timer
Configure Hello packet timer sending
from primary node of MRPP ring, format
“no” restores default timer value
Fail-timer
No fail-timer
Configure Hello packet overtime timer
sending from primary node of MRPP
ring, format “no” restores default timer
value