Accton Technology ES4626 - Manual (Page 43)

43
Timeout in milli-seconds [2000]:
Extended commands [n]:
Type ^c to abort.
Sending 5 56-byte ICMP Echos to fe80::2d0:59ff:feb8:3b27, using src address
fe80::203:fff:fe0b:16e3, timeout is 2 seconds.
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/16 ms
Displayed Information Explanation
ping6 Run ping6 function
Target IPv6 address Destination IPv6 address
Output Interface Name of Vlan interface,required to be
specified when destination address is a
local link address
Use source IPv6 address [n]: Use source IPv6 address, not used by
default
Source IPv6 address Source IPv6 IP address
Repeat count[5] Number of ping packets to be sent,5 by
default
Datagram size in byte[56] Size of Ping packet,56 by default
Timeout in milli-seconds[2000] Permitted delay time, 2 seconds by default
Extended commands[n] Configuration of extended parameter, not
applied by default
! Indicate the network is accessible
. Indicate the network is inaccessible
Success rate is 100 percent (8/8),
round-trip min/avg/max = 1/1/1 ms
Statistic information,indicating that ping
packets has succeeded in arriving in 100%
without any packet lost
2.1.1.21 reload
Command: reload
Function: Warm reset the switch.
Command mode: Admin Mode
Usage Guide: The user can use this command to restart the switch without power off.
2.1.1.22 service password-encryption
Command: service password-encryption