Accton Technology ES4626 - Manual (Page 94)

94
Switch#copy ftp:// username:password@2004:1:2:3::6/nos.img nos.img
（ 3）Save the running configuration files
Switch#copy running-config startup-config
Relevant Command: write
2.5.3.2.2.2 copy（TFTP）
Command: copy <source-url> [ascii | binary]
Function: Download files to the TFTP client
Parameter ： <source-url> is the location of the source files or directories to be
copied; is the destination address to which the files or directories to be
copied;forms of <source-url> and vary depending on different
locations of the files or directories. ascii indicates the ASCII standard will be
adopted;binary indicates that the binary system will be adopted in the file transmission
（ default transmission method）.When URL represents an TFTP address, its form should
be: tftp://{<ipaddress>|<ipv6address>| }/,amongst
<ipaddress>|<ipv6address> is the IPv4 or IPv6 address of the TFTP
server/client, is the name of the host mapping with the IPv6 address,it does
not support the file download and upload with hosts mapping with IPv4
addresses, is the name of the TFTP upload/download file.
Special keyword of the filename
Keywords Source or destination addresses
running-config Running configuration files
startup-config Startup configuration files
nos.img System files
nos.rom System startup files
Command Mode: Admin Mode
Usage Guide:
This command supports command line hints,namely if the user can enter
commands in following forms: copy tftp:// or copy tftp:// and
press Enter,following hints will be provided by the system：
tftp server ip/ipv6 address[x.x.x.x]/[x:x::x:x]>
tftp filename>
Requesting for TFTP server address, file name
Example:
（ 1）Save images in the FLASH to the TFTP server of 2004:1:2:3::6
Switch#copy nos.img tftp:// 2004:1:2:3::6/ nos.img