Accton Technology ES4626 - Manual (Page 772)

772
length of the IPv6 address prefix, the valid range is 1～128. is the source
IPv6 address.
Command Mode: Standard IPv6 nomenclature access list mode
Default: No access list configured by default.
Usage Guide:
Example: Permit packets with source address of 2001:1:2:3::1/64 while denying those
with source address of 2001:1:2:3::1/48.
Switch(Config)# ipv6 access-list standard ipv6Flow
Switch(Config-Std-Nacl-ipv6Flow)# permit 2001:1:2:3::1/64
Switch(Config-Std-Nacl-ipv6Flow)# deny 2001:1:2:3::1/48
18.2.2.25 time-range
Command:[no] time-range
Functions: Create the name of time-range as time range name, enter the time-range
mode at the same time.
Parameters:time_range_name
,time range name must start with letter, and the length
cannot exceed 16-character long.
Command Mode: Global mode
Default: No time-range configuration
Guide:
Examples: Reate a time-range named dc timer.
Switch(config)#Time-range dc_ti
18.3 ACL Example
Scenario:
The user has the following configuration requirement: port 1/10 of the switch connects to
10.0.0.0/24 segment, ftp is not desired for the user.
Configuration description:
a) Create a proper ACL
b) Configuring packet filtering function
c) Bind the ACL to the port
The configuration steps are listed below:
Switch(Config)#access-list 110 deny tcp 10.0.0.0 0.0.0.255 any-destination d-port 21
Switch(Config)#firewall enable
Switch(Config)#firewall default permit
Switch(Config)#interface ethernet 1/10