Accton Technology ES4626 - Manual (Page 73)

73
community string.
3. Configure IP address of SNMP management base
Command Explanation
snmp-server securityip {|
}
no snmp-server securityip
{| }
Configure the secure IPv4/IPv6 address
which is allowed to access the switch on
the NMS; the “no snmp-server securityip
{| }
“ command deletes configured secure
address.
snmp-server SecurityIP enable
snmp-server SecurityIP disable
Enable or disable secure IP address check
function on the NMS.
4. Configure engine ID
Command Explanation
snmp-server engineid < engine-string >
no snmp-server engineid <
engine-string >
Configure the local engine ID on the
switch. This command is used for SNMP
v3.
5. Configure user
Command Explanation
snmp-server user
[[encrypted] {auth
{md5|sha} }]
no snmp-server user
Add a user to a SNMP group. This
command is used to configure USM for
SNMP v3.
6. Configure group
Command Explanation
snmp-server group
{NoauthNopriv|AuthNopriv|AuthPriv}
[[read ] [write
] [notify ]]
no snmp-server group
{NoauthNopriv|AuthNopriv|AuthPriv}
Set the group information on the switch.
This command is used to configure VACM
for SNMP v3.
7. Configure view
Command Explanation
snmp-server view
{include|exclude}
no snmp-server view
Configure view on the switch. This
command is used for SNMP v3.
8. Configuring TRAP
Command Explanation