2 debug ipv6 pim timer srt, 3 show ipv6 pim mroute dense-mode – Accton Technology ES4626 User Manual
Page 691
691
Command Mode:
Admin Mode
Usage Guide:
Enable the switch, and display source activity timer information in detail.
Example:
Switch # debug ipv6 pim timer sat
Remark:
Other debug switches in PIM-DM are common in PIM-SM.
17.1.5.1.2 debug ipv6 pim timer srt
Command: debug ipv6 pim timer srt
no debug ipv6 pim timer srt
Function:
Enable debug switch of PIM-DM state-refresh timer information in detail; the
“no debug ipv6 pim timer srt” command disenables the debug switch.
Parameter:
None
Default:
Disabled
Command Mode:
Admin Mode
Usage Guide:
Enable the switch, and display PIM-DM state-refresh timer information in
detail
Example:
Switch # debug ipv6 pim timer srt
Remark:
Other debug switches in PIM-DM are common in PIM-SM.
17.1.5.1.3 show ipv6 pim mroute dense-mode
Command: show ipv6 pim mroute dense-mode [group <X:X::X:X>] [source
<X:X::X:X>]
Function:
Display PIM-DM message forwarding items.
Parameter:
group < X:X::X:X >: displays forwarding items relevant to this multicast
address
Source < X:X::X:X >: displays forwarding items relevant to this source.
Default:
Do not display
Command Mode:
Admin Mode
Usage Guide:
The command shows PIM-DM multicast forwarding items, namely
forwarding items of forward multicast packet in system FIB table
Example:
Display all of PIM-DM message forwarding items
Switch(config)#show ipv6 pim mroute dense-mode
IP Multicast Routing Table
(*,G) Entries: 1
(S,G) Entries: 1
(*, ff1e::15)