Accton Technology ES4626 - Manual (Page 768)

768
[no]{deny|permit}
{any-source-mac|{host-source-mac}|{}}
{any-destination-mac|{host-destination-mac}|{}}
[untagged-802-3]
[no]{deny|permit}
{any-source-mac|{host-source-mac}|{}}
{any-destination-mac|{host-destination-mac}|{}}
[tagged-eth2 [cos []] [vlanId []]
[ethertype []]]
[no]{deny|permit}
{any-source-mac|{host-source-mac}|{}}
{any-destination-mac|{host-destination-mac}|{}}
[tagged-802-3 [cos []] [vlanId []]]
Functions: Define an expansion name MAC ACL rule, and ‘no’ formof this
command deletes this expansion name IP access rule.
Parameters: any-source-mac:
any source of MAC address; any-destination-mac: any
destination of MAC address; host_smac , smac: source MAC address; smac-mask:
mask (reverse mask) of source MAC address ; host_dmac , dmas destination MAC
address; dmac-mask mask (reverse mask) of destination MAC address; untagged-eth2
format of untagged ethernet II packet; tagged-eth2 format of tagged ethernet II packet;
untagged-802-3 format of untagged ethernet 802.3 packet; tagged-802-3 format of
tagged ethernet 802.3 packet; cos-val: cos value, 0-7; cos-bitmask: cos mask,
0-7reverse mask and mask bit is consecutive; vid-value: vlanNo, 1-4094;
vid-bitmask : vlan mask, 0-4095, reverse mask and mask bit is consecutive; protocol:
specific Ethernet protocol No., 1536-65535; protocol-bitmask: protocol mask, 0-65535,
reverse mask and mask bit is consecutive.
Notice: mask bit is consecutive means the effective bit must be consecutively effective
from the first bit on the left, no ineffective bit can be added through. For example: the
reverse mask format of one byte is: 00001111b; mask format is 11110000; and this is not
permitted: 00010011.
Command Mode: Name expansion MAC access-list configuration mode
Default configuration : No access-list configured
18.2.2.22 permit | deny(mac-ip extended)
Command:[no]
{deny|permit}{any-source-mac|{host-source-mac}|{
sk>}}
{any-destination-mac|{host-destination-mac}|{}}