Accton Technology ES4626 - Manual (Page 812)

812
ip vrrp authentication mode text
no ip vrrp authentication mode
Configures the authentication mode for
VRRP packets sending on the interface,
the "no ip vrrp authentication mode"
command resets the authentication mode
to default value.
ip vrrp authentication string <string>
no ip vrrp authentication string
Configures the simple authentication
strings for VRRP packets sending on the
interface, the "no ip vrrp authentication
string" command removes the
authentication string.
5. Configure VRRP Sub-parameters
(1) Configure the preemptive mode for VRRP
Command Explanation
VRRP protocol configuration mode
preempt-mode {true| false}
Configures the preemptive mode for
VRRP
(2) Configure VRRP priority
Command Explanation
VRRP protocol configuration mode
Priority < priority > Configures VRRP priority
(3) Configure VRRP Timer intervals
Command Explanation
VRRP protocol configuration mode
advertisement-interval
Configures VRRP timer value (in
seconds)
(4) Configure VRRP interface monitor
Command Explanation
VRRP protocol configuration mode
circuit-failover {IFNAME | Vlan <ID>}
no circuit-failover
Configures VRRP interface monitor, the
"no circuit-failover" removes monitor to
the interface