Accton Technology ES4626 - Manual (Page 520)

520
commands can configure cluster-id
Command Explanation
BGP configuration mode
bgp cluster-id
no bgp cluster-id
Configure cluster id; format “no” of the no
bgp cluster-id command cancels the
cluster id configuration.
（3） If the route reflector from clients to clients is needed, the following
commands can be used.
Command Explanation
BGP configuration mode
bgp client-to-client reflection
no bgp client-to-client reflection
Configure the allowance of the route
reflector from clients to clients; the no bgp
client-to-client reflection commands
forbids this allowance.
6．Configure Peer Groups
（1） Create peer groups
Command Explanation
BGP configuration mode
neighbor peer-group
no neighbor peer-group
Create peer groups; the no
neighbor peer-group
command deletes peer groups.
（2） Add neighbors to peers groups
Command Explanation
BGP configuration mode
neighbor peer-group
no neighbor
peer-group
Make a neighbor a member of the peer
group. the no neighbor
peer-group command cancels the
specified member.
7．Configure neighbors and peer Groups’ parameters
Command Explanation
BGP configuration mode
neighbor { | } remote-as Specify a BGP neighbor; format
“no” of the no neighbor