8 show ipv6 route – Accton Technology ES4626 User Manual
Page 306

306
ff02::6
ff02::9
ff02::d
ff02::1:ff00:10
ff02::1:ff00:1
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts is 1
ND managed_config_flag is unset
ND other_config_flag is unset
ND NS interval is 1 second(s)
ND router advertisements is disabled
ND RA min-interval is 200 second(s)
ND RA max-interval is 600 second(s)
ND RA hoplimit is 64
ND RA lifetime is 1800 second(s)
ND RA MTU is 0
ND advertised reachable time is 0 millisecond(s)
ND advertised retransmit time is 0 millisecond(s)
Displayed information
Explanation
Vlan1
Layer 3 interface name
[up/up]
Layer 3 interface status
dev index
Internal index No.
fe80::203:fff:fe00:10 Automatically
configured IPv6 address of Layer
3 interface
3001::1
Configured IPv6 address of Layer 3 interface
9.2.4.1.8 show ipv6 route
Command:show ipv6 route [<destination>|<destination >/<length>| database| fib
[local]| nsm [connected | static | rip| ospf | bgp | isis| kernel| database]|statistics
[vrf
Function:
Display IPv6 routing table
Parameter:<destination>
is destination network address; <destination >/<length> is
destination network address plus prefix length; connected is directly connected router;
static
is static router; rip is RIP router; ospf is OSPF router; bgp is BGP router;isis is
ISIS router; kernel is kernel router; statistics shows router number; database is router
database.
Default Situation:
None