Accton Technology ES4626 - Manual (Page 555)

555
<0-65535> : TCP port number
Default:
Default port number is 179
Command Mode: BGP mode and address-family mode
Usage Guide: This is a configuration when the partner may connect through ports not
specified by BGP
Example: Switch(config-router)#neighbor 10.1.1.64 port 1023
13.8.3.64 neighbor prefix-list
Command:neighbor {|} prefix-list
{}
no neighbor {|} prefix-list
{|}
Function: Configure the prefix restrictions applied in sending or receiving routes from
specified neighbors.The “no neighbor {|} prefix-list
{|} ” command cancels this configuration
Parameter:
: Neighbor IP address
: Name of the peer group
: Name or sequence number of the prefix-list
: Direction on which the restrictions applied
Default: No prefix restrictions applied
Command Mode: BGP mode and address-family mode
Usage Guide: Specify the prefix and its scope by configuring ip prefix-list and determines
whether this scope is permitted or denied. Only the route with permitted prefix will be sent
or received
Example:
Switch(config)#ip prefix-list prw permit 100.1.0.0/22 ge 23 le 25
Switch(config)#router bgp 200
Switch(config-router)#redistribute static
Switch(config-router)neighbor 10.1.1.66 prefix-list prw out
13.8.3.65 neighbor remote-as
Command:neighbor {|} remote-as
no neighbor {|} [remote-as ]
Function: Configure the BGP neighbor. The “no neighbor {|}
[remote-as ] ” command is used for deleting BGP neighbors.
Parameter: : Neighbor IP address
: Name of peer group
: : Neighbor AS number ranging between 1-65535