Accton Technology ES4626 - Manual (Page 204)

204
Function: Configure the specified VLAN to Voice VLAN; the “no voice-vlan " command
cancels the Voice VLAN configuration of this VLAN
Parameter: Vlan id is the number of the specified VLAN
Command Mode: Global Mode
Default: No Voice VLAN is configured by default
Usage Guide: Set specified VLAN for Voice VLAN, There can be only one Voice VLAN
at the same time. The voice VLAN can not be applied concurrently with MAC-based
VLAN
Example:
Set VLAN100 to Voice VLAN
Switch#config
Switch(config)#voice-vlan vlan 100
5.6.3 Typical Applications Of The Voice VLAN
Scenario
A company realizes voice communication through configuring Voice VLAN.
IP-phone1 and IP-phone2 can be connected to any port of the switch, namely normal
communication and interconnected with other switches through the uplink port.
IP-phone1 MAC address is 00-03-0f-11-22-33,IP-phone2 MAC address is
00-03-0f-11-22-55
Figure 5-6 VLAN typical apply topology Figure
Configuration
items
Configuration Explanation
Voice VLAN Global configuration on the Switch