Accton Technology ES4626 - Manual (Page 155)

155
3. Enter port-channel configuration mode.
Command Explanation
Global Mode
interface port-channel
Enters port-channel configuration mode.
4.3 Commands for port channel
4.3.1 debug lacp
Command: debug lacp
no debug lacp
Function: Enables the LACP debug function: “no debug lacp” command disables this
debug function.
Command mode: Admin Mode
Default: LACP debug information is disabled by default.
Usage Guide: Use this command to enable LACP debugging so that LACP packet
processing information can be displayed.
Example: Enabling LACP debug.
Switch# debug lacp
4.3.2 port-group
Command: port-group [load-balance { src-mac|dst-mac |
dst-src-mac | src-ip| dst-ip|dst-src-ip}]
no port-group <port-group-number> [load-balance]
Function: Creates a port group and sets the load balance method for that group. If no
method is specified, the default load balance method is used. The “no port-group
<port-group-number> [load-balance] ” command deletes that group or restores the
default load balance setting. Enter “load-balance” for restoring default load balance,
Command Explanation
Interface Mode
port-group mode
{active|passive|on}
no port-group
Adds ports to the port group and sets their
mode.