Accton Technology ES4626 - Manual (Page 462)

462
Function: The command is for configuring the size of external link database and the
waiting time before the route exits overflow state. The “[no]overflow database external
[ ] ” restores the default value
Parameter: < maxdbsize > size of external link database, ranging between
0~4294967294 , defaulted at 4294967294
< maxtime > the seconds the router has to wait before exiting the database overflow,
ranging between 0~65535
Command Mode: OSPF protocol mode
Example:
Switch#config terminal
Switch(config)#router ospf
Switch(config-router)#overflow database external 5 3
13.6.3.37 passive-interface
Command: [no] passive-interface
Function: Configure that the hello group not sent on specific interfaces. The “[no]
passive-interface
“ command cancels this function
Parameter: <ifname> is the specific name of interface
IP address of the interface, shown in dotted decimal notation
Default: Not configured
Command Mode: OSPF protocol mode
Example: Switch#config terminal
Switch(config)#router ospf
Switch(config-router)#passive-interface vlan1
13.6.3.38 redistribute
Command: [no]redistribute {kernel |connected| static| rip| isis| bgp} [metric<value>]
[metric-type {1|2}][route-map][tag]
Function: Introduce route learnt from other routing protocols into OSPF
Parameter: kernel introduce from kernel route
connected introduce from direct route
static introduce from static route
rip introduce from the RIP route
isis introduce from ISIS route
bgp introduce from BGP route
metric <value> is the introduced metric value, ranging between 0-16777214
metric-type {1|2} is the metric value type of the introduced external route, which
can be 1 or 2, and it is 2 by default
route-map point to the probe of the route map for introducing route