Accton Technology ES4626 - Manual (Page 216)

216
Example： Set the violation mode of port 1 to shutdown
Switch(Config)#interface Ethernet 1/1
Switch(Config-Ethernet1/1)#port-security violation shutdown
6.5.1.3.8 show port-security
Command: show port-security
Function: Display the secure MAC addresses of the port.
Command mode: Admin Mode
Parameter: stands for the port to be displayed.
Usage Guide: This command displays the secure port MAC address information, if no
port is specified, secure MAC addresses of all ports are displayed. The following is an
example:
Switch# show port-security interface ethernet 1/3
Ethernet1/3 Security Mac Address Table
--------------------------------------------------------------------------------------------------
Vlan Mac Address Type Ports
1 0000.0000.1111 SecureConfigured Ethernet1/3
--------------------------------------------------------------------------------------------------
Total Addresses : 1
Displayed information Explanation
Vlan The VLAN ID for the secure MAC Address
Mac Address Secure MAC address
Type Secure MAC address type
Ports The port that the secure MAC address
belongs to
Total Addresses Current secure MAC address number in
the system.
6.5.1.3.9 show port-security address
Command: show port-security address [interface ]
Function:
Display the secure MAC addresses of the port.
Command mode: Admin Mode
Parameter: stands for the port to be displayed.
Usage Guide: This command displays the secure port MAC address information, if no
port is specified, secure MAC addresses of all ports are displayed. The following is an
example:
Switch# show port-security address interface ethernet 1/3