Accton Technology ES4626 - Manual (Page 91)

91
up configuration file, which is called configuration save. To prevent illicit file upload and
easier configuration, ES4624-SFP/ES4626-SFP switch mandates the name of running
configuration file to be running-config.
Factory configuration file: The configuration file shipped with
ES4624-SFP/ES4626-SFP switch in the name of factory-config. Run set default and
write , and restart the switch, factory configuration file will be loaded to overwrite current
start up configuration file.
2.5.3.2 FTP/TFTP Configuration
The configurations of ES4624-SFP/ES4626-SFP switch as FTP and TFTP clients
are almost the same, so the configuration procedures for FTP and TFTP are described
together in this manual.
2.5.3.2.1 FTP/TFTP Configuration Task List
1. FTP/TFTP client configuration
Upload/download the configuration file or system file.
（ 1） For FTP client, server file list can be checked.
2. FTP server configuration
（ 1） Start FTP server
（ 2） Configure FTP login username and password
（ 3） Modify FTP server connection idle time
（ 4） Shut down FTP server
3. TFTP server configuration
（ 1） Start TFTP server
（ 2） Configure TFTP server connection idle time
（ 3） Configure retransmission times before timeout for packets without
acknowledgement
（ 4） Shut down TFTP server
1. FTP/TFTP client configuration
（ 1）FTP/TFTP client upload/download file
Command Explanation
Admin Mode
copy <source-url>
[ascii | binary]
FTP/TFTP client upload/download file
（ 2）For FTP client, server file list can be checked.
Global Mode