Accton Technology ES4626 - Manual (Page 840)

840
Switch(MRPP-ring-100)#primary-port Ethernet 1/1
Switch(MRPP-ring-100)#secondary-port Ethernet 1/2
Switch(MRPP-ring-100)#enable
Switch(MRPP-ring-100)#exit
Switch(Config)#
SWITCH F configuration Task Sequence:
Switch(Config)#MRPP enable
Switch(Config)#MRPP ring 100
Switch(MRPP-ring-100)#control-vlan 100
Switch(MRPP-ring-100)#primary-port Ethernet 1/1
Switch(MRPP-ring-100)#secondary-port Ethernet 1/2
Switch(MRPP-ring-100)#enable
Switch(MRPP-ring-100)#exit
Switch(Config)#
SWITCH G configuration Task Sequence:
Switch(Config)#MRPP enable
Switch(Config)#MRPP ring 100
Switch(MRPP-ring-100)#control-vlan 100
Switch(MRPP-ring-100)#primary-port Ethernet 1/1
Switch(MRPP-ring-100)#secondary-port Ethernet 1/2
Switch(MRPP-ring-100)#node-mode master
Switch(MRPP-ring-100)#enable
Switch(MRPP-ring-100)#exit
Switch(Config)#
21.5 MRPP troubleshooting
The normal operation of MRPP protocol depends on normal configuration of each
switch on MRPP ring, otherwise it is very possible to form ring and broadcast storm:
) Configuring MRPP ring, you’d better disconnected the ring, and wait for each switch
configuration, then open the ring.
) When the MRPP ring of enabled switch is disabled on MRPP ring, it ensures the ring
of the MRPP ring has been disconnected.
) When there is broadcast storm on MRPP ring, it disconnects the ring firstly, and
ensures if each switch MRPP ring configuration on the ring is correct or not; if correct,
restores the ring, and then observes the ring is normal or not.
In normal configuration, it still forms ring broadcast storm or ring block, please open