Accton Technology ES4626 - Manual (Page 188)

188
translation, respectively translation the VLAN ID at the entrance or exit.
Application and configuration of VLAN translation will be explained in detail in this
section.
5.4.2 VLAN-translation Configuration
5.4.2.1 Configuration task sequence of VLAN-translation
1. Configure the VLAN-translation function on the port
2. Configure the VLAN-translation relations on the port
3. Configure the VLAN-translation packet dropped on port if there is any failure.
1. Configure the VLAN-translation of the port
2. Configure the VLAN-translation relation of the port
3. Configure the VLAN-translation relation, check if there is any failure or packet
dropped
5.4.3 Commands for VLAN-Translation Configuration
5.4.3.1 show vlan-translation
Command Explanation
Port mode
vlan-translation enable
no vlan-translation enable
Enter/exit the port VLAN-translation
mode
Command Explanation
Port mode
vlan-translation <old-vlan-id> to
<new-vlan-id> {in|out}
no vlan-translation old-vlan-id {in|out}
Add/delete a VLAN-translation relation
Command Explanation
Port mode
vlan-translation miss drop {in|out|both}
no vlan-translation miss drop
{in|out|both}
Configure the VLAN-translation packet
dropped on port if there is any failure.