5 cluster administration troubleshooting, 1 show cluster, 2 show cluster members – Accton Technology ES4626 User Manual
Page 851: 3 show cluster candidates
851
Switch(Config)#cluster commander 4624
Switch(Config)#cluster auto-add enable
2. Configure the member switch
Configuration of SwitchB-SwitchD
Switch(Config)#cluster run
22.1.5 Cluster Administration Troubleshooting
22.1.5.1 Cluster Administration Debugging and Monitoring Command
22.1.5.1.1 show cluster
Command: show cluster
Function:
Display the basic information of the member or command switch
Command Mode:
Admin Mode
Example：
Execute this command on the switch 1234
Switch#show cluster
Command switch for cluster 1234
Total number of members: 6
Status: 3 Inactive
Time since last status change: 20 hours,30 minutes,15 seconds
Heartbeat interval: 8 seconds
Heartbeat hold-time: 80 seconds
Cluster's snmp rw community string:public
22.1.5.1.2 show cluster members
Command: show cluster members
Function:
Display the statistic information of the joined members on the switch
Command Mode:
Admin Mode
Usage Guide:
Executing this command on the switch will display the information of the
joined member switches such as member ID, MAC address, equipment name and type,
status (UP/DOWN)
22.1.5.1.3 show cluster candidates
Command: show cluster candidates
Function:
Display the statistic information of the candidate member switches on the
command switch
Command Mode:
Admin Mode