Accton Technology ES4626 - Manual (Page 478)

478
Number of external LSA 0. Checksum Sum 0x000000
Number of opaque AS LSA 0. Checksum Sum 0x000000
Number of non-default external LSA 0
External LSA database is unlimited.
Number of LSA originated 0
Number of LSA received 0
Number of areas attached to this router: 1
Area 0 (BACKBONE) (Inactive)
Number of interfaces in this area is 0(0)
Number of fully adjacent neighbors in this area is 0
Area has no authentication
SPF algorithm executed 0 times
Number of LSA 0. Checksum Sum 0x000000
13.6.5.1.9 show ip ospf border-routers
Command: show ip ospf [] border-routers
Function: Display ABR and ASBR under all OSPF instances
Parameter: is the process ID, ranging between 0~65535
Default:
Not displayed
Command Mode: All modes
Example:
Switch#show ip ospf border-routers
OSPF process 0 internal Routing Table
Codes: i - Intra-area route, I - Inter-area route
i 10.15.0.1 [10] via 10.10.0.1, Vlan1, ASBR, Area 0.0.0.0
i 172.16.10.1 [10] via 10.10.11.50, Vlan2, ABR, ASBR, Area 0.0.0.0
13.6.5.1.10 show ip ospf database
Command: show ip ospf [] database[{
[<linkstate_id>]asbr-summary[{self-originate |adv-router <advertiser_router>}]
| [<linkstate_id>]externel [{self-originate |adv-router <advertiser_router>}]
| [<linkstate_id>]network [{self-originate |adv-router <advertiser_router>}]
| [<linkstate_id>]nssa-external [{self-originate |adv-router <advertiser_router>}]
| [<linkstate_id>]opaque-area [{self-originate |adv-router <advertiser_router>}]
| [<linkstate_id>]opaque-as [{self-originate |adv-router <advertiser_router>}]
| [<linkstate_id>]opaque-link [{self-originate |adv-router <advertiser_router>}]
| [<linkstate_id>]router [{self-originate |adv-router <advertiser_router>}]
| [<linkstate_id>]summary [{self-originate |adv-router <advertiser_router>}]
|self-originate | max-age }]