Accton Technology ES4626 - Manual (Page 19)

19
Fig 1-4 Opening HyperTerminal
4) COM1 property appears, select “9600” for “Baud rate”, “8” for “Data bits”, “none” for
“Parity checksum”, “1” for stop bit and “none” for traffic control;or,you can also click
“Restore default” and click “OK”.
Fig 1-5 Opening HyperTerminal
Step 3
:Entering switch CLI interface
Power on the switch, the following appears in the HyperTerminal windows, that is the
CLI configuration mode for ES4624-SFP/ES4626-SFP Switch.
ES4624-SFP Management Switch