Accton Technology ES4626 - Manual (Page 318)

318
identifier of specified VLAN; <hw-addr> for entry of specified MAC address; “static” for
static ARP entry; “dynamic” for dynamic ARP entry; “count” displays number of ARP
entries.
Command mode: Admin Mode
Usage Guide: Displays the content of current ARP table such as IP address, MAC
address, hardware type, interface name, etc.
Example:
Switch#sh arp
Total arp items: 3, matched: 3, Incomplete: 0
Address Hardware Addr Interface Port Flag
50.1.1.6 00-0a-eb-51-51-38 Vlan50 Ethernet1/11 Dynamic
50.1.1.9 00-00-00-00-00-09 Vlan50 Ethernet1/1 Static
150.1.1.2 00-00-58-fc-48-9f Vlan150 Ethernet1/4 Dynamic
Displayed information Explanation
Total arp items Total number of Arp entries.
the matched ARP entry number matching the filter conditions
InCompleted ARP entries have ARP request sent without ARP
reply
Address IP address of Arp entries
Hardware Address MAC address of Arp entries
Interface Layer 3 interface corresponding to the ARP entry.
Port Physical (Layer2) interface corresponding to the
ARP entry.
Flag Describes whether ARP entry is dynamic or static.