Accton Technology ES4626 - Manual (Page 128)

128
Example: “ping” 192.168.1.180 and then click “Apply.”
2.10.4.2 Show vlan port property
Users should click “Switch basic configuration”, “Basic configuration debug” and “show
switchport interface” to enter into the configuration page and make configuration nodes.
“Port” means the port table.
Example: User finds a VLAN port’s properties by choosing port1/1 and click “Apply.”
2.10.4.3 Others
Other parts are easier to configure. Users just click a configuration node and the relating
messages will appear.
Example:
to display the clock:
to display FLASH files:
2.10.5 Switch Maintenance
On the left directory of the root page, users should click “Switch maintenance” to
configure maintenance nodes through web interface.
2.10.5.1.1 Exit current web configuration
Users should quit the web-login by clicking “Switch maintenance” and “Exit current web
configuration.”
2.10.5.2 Save current running-config