Accton Technology ES4626 - Manual (Page 394)

394
key <keyid>
no key
Enter the keychain-key mode and configure a
key of the keychain; the no key
command deletes one key.
Keychain-key mode
key-string
no key-string
Configure the password used by the key, the
no key-string command deletes the
password
accept-lifetime <start-time>
{<end-time>| duration|
infinite}
no accept-lifetime
Configure a key on the key chain and accept
it as an authorized time; the no
accept-lifetime command delete it
send-lifetime <start-time>
{<end-time>| duration|
infinite}
no send-lifetime
Configure the transmitting period of a key on
the key chain; the no send-lifetime
command delete the send-lifetime
3）Configure the route deviation
Command Explanation
Router configuration mode
offset-list
|access-list-name> {in|out }
>[]
no offset-list
|access-list-name> {in|out }
>[]
Configure that provide a deviation value to the
route metric value when the port sends or
receives RIP data packet; the no offset-list
{in|out }[]
command
removes the deviation table
4）configure and apply the route filtering
Command Explanation
Router configuration mode
distribute-list {< access-list-number
|access-list-name
>|prefix}{in|out}
[]
no distribute-list {<
access-list-number |access-list-name
>|prefix}{in|out}
[]
Configure and apply the access table and
prefix table to filter the routes. the no
distribute-list {< access-list-number
|access-list-name
>|prefix}{in|out}
[] command means do not use the
access table and prefix table