Accton Technology ES4626 - Manual (Page 100)

100
Switch (Config)#exit
Switch#copy ftp: //Switch: [email protected]/nos.img nos.img
Switch#copy ftp: //Switch: [email protected]/boot.rom boot.rom
Switch#copy ftp: //Switch: [email protected]/startup-config startup-config
With the above commands, the switch will have the user profile configuration file in the
computer downloaded to the FLASH.
z TFTP Configuration
Computer side configuration:
Start TFTP server software on the computer and place “nos.img”, “boot.rom” and
“startup-config” to the appropriate TFTP server directory on the computer.
The configuration procedures of the switch is listed below:
Switch (Config)#inter vlan 1
Switch (Config-If-Vlan1)#ip address 10.1.1.2 255.255.255.0
Switch (Config-If-Vlan1)#no shut
Switch (Config-If-Vlan1)#exit
Switch (Config)#exit
Switch#copy tftp: //10.1.1.1/ nos.img nos.img
Switch#copy tftp: //10.1.1.1/ boot.rom boot.rom
Switch#copy tftp: //10.1.1.1/ startup-config startup-config
Scenario 5: ES4624-SFP/ES4626-SFP switch acts as FTP client to view file list on the
FTP server.
Synchronization conditions: The switch connects to a computer by an Ethernet port, the
computer is a FTP server with an IP address of 10.1.1.1; the switch acts as a FTP client,
and the IP address of the switch management VLAN1 interface is 10.1.1.2.
z FTP Configuration
PC side:
Start the FTP server software on the PC and set the username “Switch”, and the
password “Admin”.
ES4624-SFP/ES4626-SFP switch:
Switch (Config)#inter vlan 1
Switch (Config-If-Vlan1)#ip address 10.1.1.2 255.255.255.0
Switch (Config-If-Vlan1)#no shut
Switch (Config-If-Vlan1)#exit
Switch (Config)#dir ftp: //Switch: [email protected]
220 Serv-U FTP-Server v2.5 build 6 for WinSock ready...
331 User name okay, need password.
230 User logged in, proceed.