Accton Technology ES4626 - Manual (Page 258)

258
Interface Mode
mls qos trust [cos [pass-through-dscp]|dscp
[pass-through-cos]|ip-precedence [pass-through
cos]|port priority <cos>]
no mls qos trust
Configure port trust; the “no
mls qos trust ” command
disables the current trust
status of the port.
mls qos cos { }
no mls qos cos
Configure the default CoS
value of the port; the “no
mls qos cos ” command
restores the default setting.
service-policy {input <policy-map-name> | output
<policy-map-name>}
no service-policy {input <policy-map-name> |
output <policy-map-name>}
Apply a policy map to the
specified port; the “no
service-policy {input
<policy-map-name> |
output
<policy-map-name>} ”
command deletes the
specified policy map applied
to the port. Egress policy
map is not supported yet.
mls qos dscp-mutation <dscp-mutation-name>
no mls qos dscp-mutation <dscp-mutation-name>
Apply DSCP mutation
mapping to the port; the “no
mls qos dscp-mutation
<dscp-mutation-name>
”
command restores the
DSCP mutation mapping
default.
5. Configure queue out method and weight
Command Explanation
Interface Mode
queue bandwidth
weight3 weight4 weight5 weight6
weight7 weight8>
no queue bandwidth
Set the WRR weight for specified
egress queue; the “no queue
bandwidth
” command restores the
default setting.
queue mode strict
queue mode wrr
Configure queue out method to pq
method; the “queue mode wrr”
command restores the default WRR
queue out method.
Global Mode