Accton Technology ES4626 - Manual (Page 481)

481
192.168.1.1 1 Full/Backup 00:00:32 6.1.1.1 Vlan1
192.168.1.3 1 Full/DR 00:00:36 20.1.1.3 Vlan2
192.168.1.3 1 Full/ - 00:00:30 20.1.1.3 VLINK2
Displayed information Explanation
Neighbor ID ID Neighbor ID
Priority Priority
State Neighbor relation state
Dead time Neighbor dead time
Address Interface Address
Interface Interface name
13.6.5.1.13 show ip ospf route
Command: show ip ospf [] route
Function:
Display the OSPF routing table messages
Parameter: is the process ID ranging between 0~65535
Default: Not displayed
Command Mode: All modes
Example:
Switch#show ip ospf route
O 10.1.1.0/24 [10] is directly connected, Vlan1, Area 0.0.0.0
O 10.1.1.4/32 [10] via 10.1.1.4, Vlan1, Area 0.0.0.0
IA 11.1.1.0/24 [20] via 10.1.1.1, Vlan1, Area 0.0.0.0
IA 11.1.1.2/32 [20] via 10.1.1.1, Vlan1, Area 0.0.0.0
IA 12.1.1.0/24 [20] via 10.1.1.2, Vlan1, Area 0.0.0.0
IA 12.1.1.2/32 [20] via 10.1.1.2, Vlan1, Area 0.0.0.0
O 13.1.1.0/24 [10] is directly connected, Vlan4, Area 0.0.0.3
O 14.1.1.0/24 [10] is directly connected, Vlan5, Area 0.0.0.4
IA 15.1.1.0/24 [20] via 13.1.1.2, Vlan4, Area 0.0.0.3
IA 15.1.1.2/32 [20] via 13.1.1.2, Vlan4, Area 0.0.0.3
E1 100.1.0.0/16 [21] via 10.1.1.1, Vlan1
E1 100.2.0.0/16 [21] via 10.1.1.1, Vlan1
13.6.5.1.14 show ip ospf virtual-links
Command: show ip ospf [] virtual-links
Function: Display the OSPF virtual link message
Parameter: is the process ID ranging between 0~65535
Default:
Not displayed