Accton Technology ES4626 - Manual (Page 728)

728
address, it will send a MLD Multicast listener Report back through the multicast address.
MLD Snooping is namely the MLD listening. The switch restricts the multicast traffic
from flooding through MLD Snooping, and forward the multicast traffic to ports associated
to multicast devices only. The switch listens to the MLD messages between multicast
routers and listeners, and maintains the multicast group forwarding list based on the
listening result. The switches forwards multicast packets according to the multicast
forwarding list
The switch realizes the MLD Snooping function while supporting MLD v2. This way,
the user can acquire IPv6 multicast with the switch.
17.4.2 MLD Snooping Configuration Task
1. Enable the MLD Snooping function
2. Configure the MLD Snooping
1. Enable the MLD Snooping function
Command Explanation
Global Mode
ipv6 mld snooping
no ipv6 mld snooping
Enable global MLD Snooping, the “no ipv6 mld
snooping ” command disables the global MLD
snooping
2.
Configure MLD Snooping
Command Explanation
Global Mode
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Enable MLD Snooping on specific vlan. The “no”
form of this command disables MLD Snooping
on specific vlan
ipv6 mld snooping vlan < vlan-id >
limit {group <g_limit> | source
<s_limit>}
no ipv6 mld snooping vlan <
vlan-id > limit
Configure the number of the groups in which the
MLD Snooping can join, and the maximum
number of sources in each group. The “no” form
of this command restores to the default
ipv6 mld snooping vlan <vlan-id>
l2-general-querier
no ipv6 mld snooping vlan
<vlan-id> l2-general-querier
Set the vlan level 2 general querier,which is
recommended on each segment. The “no” form
of this command cancels the level 2 general
querier configuration.
ipv6 mld snooping vlan
mrouter-port interface
Configure the static mrouter port in specific vlan.
The “no” form of this command cancels the