Accton Technology ES4626 - Manual (Page 585)

585
BGP table version is 13, local router ID is 10.1.1.66
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path
*d 100.1.3.0/24 10.1.1.64 3 00:06:05 00:27:00 100 ?
Switch#sh ip bgp dampening parameters
dampening 15 750 2000 60 15 (route-map rmp)
Reach ability Half-Life time : 15 min
Reuse penalty : 750
Suppress penalty : 2000
Max suppress time : 60 min
Un-reach ability Half-Life time : 15 min
Max penalty (ceil) : 11999
Min penalty (floor) : 375
Total number of prefixes 1
13.8.5.1.7 show ip bgp filter-list
Command: show ip bgp []filter-list []
Function: For displaying the routes in BGP meeting the specific AS filter list
Parameter: : address-family such as “ipv4 unicast”
< WORD > : AS-PATH access-list name
Default: None
Command Mode:
All modes
Usage Guide: Configure AS access-list with ip as-path access-list command. This
command can show the routes passed the access-list.
Example:
Switch#SH IP BGP filter-list FL
BGP table version is 2, local router ID is 11.1.1.100
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 100.1.1.0/24 10.1.1.64 0 0 100 ?
Total number of prefixes 1