Accton Technology ES4626 - Manual (Page 786)

786
dot1x re-authenticate
[interface
<interface-name>]
Enables IEEE 802.1x re-authentication (no wait timeout
requires) for all ports or a specified port.
4. Authentication Server (RADIUS server) related property configuration
1) Configure RADIUS authentication key.
Command Explanation
Global Mode
radius-server key
no radius-server key
Specifies the key for RADIUS server; the “no
radius-server key”
command deletes the key for
RADIUS server.
2) Configuring RADIUS Server
Command Explanation
Global Mode
radius-server
authentication host
{|
>} [[port {}]
[primary]]
no radius-server
authentication host
Specifies the IP address or IPv6 address and listening
port number for RADIUS authentication server; the “no
radius-server authentication host
“ command deletes the RADIUS server
radius-server accounting
host
{|
>} [[port {}]
[primary]]
no radius-server
accounting host
Specifies the IP address or IPv6 address and listening
port number for RADIUS accounting server; the “no
radius-server authentication host
“ command deletes the RADIUS server
3) Configure RADIUS Service parameters.
Command Explanation
Global Mode
radius-server dead-time
no radius-server dead-time
Configures the restore time when RADIUS server is
down; the “no radius-server dead-time” command
restores the default setting.