Accton Technology ES4626 - Manual (Page 704)

704
Usage Guide: This command is to configure static RP globally or in a multicast address
range.
Example: Configure 2000:112::8 as RP address globally
Switch (Config)# ipv6 pim rp-address 2000:112::8 ff1e::/64
17.2.3.17 ipv6 pim rp-candidate
Command: Ipv6 pim rp-candiate <ifname> [<group range>] [<priority>]
no ipv6 pim rp-candiate <ifname>
Function:
This command is the candidate RP global configure command, it is used to
configure PIM-SM candidate RP information in order to compete RP router with other
candidate RPs.The “no ipv6 pim rp-candiate” command cancels the candidate RP.
Parameter: <ifname> is the name of the interface;
<group range> is the group range of the candidate RP,the format is X:X::X:X/M,
ipv6 address and prefix length;
is the RP selection priority, ranges from 0 to 255, the default value is
192, the lower value has more priority
Default: This switch is not a RP static router.
Command Mode: Global Mode
Usage Guide: This command is the candidate RP global configure command, it is used
to configure PIM-SM candidate RP information in order to compete RP router with other
candidate RPs.Only this command is configured, this switch is the RP candidate router
Example: Configure vlan1 as the sending interface of candidate RP announce messages
Switch (Config)# ipv6 pim rp-candidate vlan1 100
17.2.3.18 ipv6 pim rp-register-kat
Command: ipv6 pim rp-register-kat <vaule>
no ipv6 pim rp-register-kat
Function: This command is to configure the KAT(KeepAlive Timer)value of the
RP(S,G)items, the unit is second. The “no ipv6 pim rp-register-kat” command restores
the default value
Parameter: <vaule> is the timer value, ranges from 1 to 65535s
Default: 185s
Command Mode: Global Mode
Usage Guide: Configure rp-register-kat interval to 30s
Example: Switch(config)# ipv6 pim rp-register-kat 30
17.2.3.19 ipv6 pim sparse-mode
Command: ipv6 pim sparse-mode [passive]