5 configure extended acl name configuration, 6 firewall configuration – Accton Technology ES4626 User Manual
Page 780
780
Click “ACL name configuration” to open up the sub-sections, next click “ACL name
configuration” to enter the configuration page. The way to configure the “ACL name
configuration” is the same with “Numeric ACL Configuration”. The only difference users
should change the ACL number to the ACL name. This should be entered in ACL name
not ACL number. CLI command: 1.2.2.6
There are seven sub-sections of this:
z
ACL
name
z
ACL type - standard and extended
z
Rule - permit and deny
z
Source address type - Specified IP address or any randomly allocated IP address
Source IP address
z
Reverse network mask
z
Operation type -Add or Remove
To add a numeric ACL, specify the ACL name and related value, select the “add” in the
Operation type and then click “Apply”.
18.5.5 Configure extended ACL name configuration
Click “ACL name configuration”, the configuration sections will then be shown. There are
6 types of extended ACL name configurations:
z
IP extended ACL name configuration
z
ICMP extended ACL name configuration
z
IGMP extended ACL name configuration
z
TCP extended ACL name configuration
z
UDP extended ACL name configuration
z
Other protocols extended ACL name configuration
Click the related the configuration web page, the configuration is the same with it is with
numeric extended ACL. The only difference is the ACL number needs to be changed to
ACL name, and entered into the ACL name rather than number. CLI command: 1.2.2.5.
18.5.6 Firewall configuration