21 bgp log-neighbor-changes, 22 bgp multiple-instance, 23 bgp network import-check – Accton Technology ES4626 User Manual
Page 535
535
information. With the “no bgp inbound-route-filter” command the BGP will save the
routing message with no regard to the matched information
Example:
Switch(config)#router bgp 100
Switch(config-router)#no bgp inbound-route-filter
13.8.3.21 bgp log-neighbor-changes
Command: bgp log-neighbor-changes
no bgp log-neighbor-changes
Function:
Output log message when BGP neighbor changes. The “no bgp
log-neighbor-changes
” command cancels this configuration.
Parameter:
None
Default:
Not configured
Command Mode: BGP route mode
.
Usage Guide:
Can display neighbor change messages on the monitor
Example:
Switch(config-router)# bgp log-neighbor-changes
13.8.3.22 bgp multiple-instance
Command: bgp multiple-instance
no bgp multiple-instance
Function:
Set that whether BGP supports multiple BGP instance or not; the “no bgp
multiple-instance
” command mean multiple BGP instance not supported
Parameter:
None
Default:
Multiple instance not supported
Command Mode:
Global mode
Usage Guide:
Set that whether BGP supports multiple BGP instance or not; this
configuration should be set before the BGP instance configuration
Example:
Switch(config)#bgp multiple-instance
13.8.3.23 bgp network import-check
Command: bgp network import-check
no bgp network import-check
Function:
Set whether check the IGP accessibility of the BGP network route or not. The
“no bgp network import-check” command sets to not checking the IGP accessibility
Parameter:
None
Default:
Not configured
Command Mode: BGP route mode
.