3 revision level control, 2 mstp port operation, 1 edge port setting – Accton Technology ES4626 User Manual
Page 246: 2 port priority setting, 3 port route cost setting
246
Set the MSTP field name to "mstp-test". Equivalent command 1.2.1.4.
7.6.1.3 Revision level control
Click “MSTP control” to enter MSTP field operation, then "revision-level Config".
Configure the revision level value for calculating MST configuration ID under MST
configuration mode.
Set the revision level to 2000.
7.6.2 MSTP port operation
7.6.2.1 Edge port setting
Click “MSTP control” to enter MSTP field operation, then "PortFast Config".
Set the port to be an edge port
Configure port 1/5 to be edge ports.
7.6.2.2 Port priority setting
Click “MSTP control” to enter MSTP port operation, then "Port Priority Config".
Set the priority for the current port on specified instance
Set the priority for port 1/2 of instance1 to 32.
7.6.2.3 Port route cost setting
Click “MSTP control” to enter MSTP port operation, then "Port Cost Config".
Set the port route cost on specified instance for the current port
Set on port 1/2 route cost of the MSTP port corresponding to Instance 2 to 3000000.