Accton Technology ES4626 - Manual (Page 703)

703
neighbor of source host direction.
Parameter: <ifname>
is the interface name that will be the register packets source.
<source-address> is the interface address will be the register packets source. In
the format of hex without prefix length.
Default: Do not check.
Command Mode: Global Mode
Usage Guide: The “no ipv6 pim register-source” command restores the default value,
no more parameter is needed. Configured address must be reachable to Register-Stop
messages sent by RP. It’s usually a circle address, but it can be other physical addresses.
This address must be announcable through unicast router protocols of DR.
Example: Configure the source address of the sent register packets to vlan1’s address
Switch(config)# ipv6 pim register-source Vlan1
17.2.3.15 ipv6 pim register-suppression
Command: ipv6 pim register-suppression <value>
no ipv6 pim register-suppression
Function: This command is to configure the value of register suppression timer, the unit
is second
Parameter: <value> is the timer’s value, it ranges from 1 to 65535s
Default: 60s
Command Mode: Global Mode
Usage Guide: If this value is configured at DR,it’s the value of register suppression timer;
if this value is configured at RP and ipv6 pim rp-register-kat is not used at RP, this
command modifies Keepalive-period value. The “no ipv6 pim register-suppression”
command restores the default value.
Example: Configure the value of register suppression timer to 30s
Switch(config)# ipv6 pim register-suppression 30
17.2.3.16 ipv6 pim rp-address
Command: Ipv6 pim rp-address <rp-address> [<group-range> ]
no ipv6 pim rp-address <rp-address> [all|<group-range>]
Function: This command is to configure static RP globally or in a multicast address
range. The “no ipv6 pim rp-address” command cancels static RP.
Parameter: <rp-address> is the RP address, the format is X:X::X:X ,ipv6 address
<group-range> is the expected RP, the format is X:X::X:X/M, ipv6 address and
prefix length all the ranges
Default:
This switch is not a RP static router
Command Mode: Global Mode