Accton Technology ES4626 - Manual (Page 66)

66
range of local0 ～ local7,which is in accordance with the facility defined in the
RFC3164;<severity> is the severity threshold of the log information severity level,The
rule of the log information output is explained as follows：only those with a level equal to
or higher than the threshold will be outputted. For detailed description on the severity
please refer to the operation manual.
Command Mode: Global Mode
Default: No log information output to the log host by default. The default recorder of the
log host is the local0, the default severity level is warnings
Usage Guide:
Only when the log host is configured by the logging command, this
command will be available. We can configure many IPv4 and IPv6 log hosts.
Example 1： Send the log information with a severity level equal to or higher than warning
to the log server with an IPv4 address of 100.100.100.5, and save to the log recording
equipment local1
Switch(Config)# logging 100.100.100.5 facility local1 level warnings
Example 2： Send the log information with a severity level equal to or higher than
informational to the log server with an IPv6 address of 3ffe:506:1:2::3, and save to the log
recording equipment local1
Switch(Config)# logging 3ffe:506:1:2::3 facility local5 level informational
2.2.9.3 System Log Configuration Example
Example 1： When managing VLAN the IPv4 address of the switch is 100.100.100.1, and
the IPv4 address of the remote log server is 100.100.100.5. It is required to send the
log information with a severity equal to or higher than warnings to this log server and
save in the log record equipment local1
Configuration procedure:
Switch(Config)#interface Ethernet 0
Switch(Config-Ethernet0)#ip address 100.100.100.1 255.255.255.0
Switch(Config-Ethernet0)#exit
Switch(Config)#logging 100.100.100.5 facility local1 level warnings
Example 2： When managing VLAN the IPv6 address of the switch is 3ffe:506::1, and the
IPv4 address of the remote log server is 3ffe:506::4. It is required to send the log
information with a severity equal to or higher than critical to this log server and save the
log in the record equipment local7.
Configuration procedure
Switch(Config)#interface Ethernet 0
Switch(Config-Ethernet0)#ipv6 address 3ffe:506::1/64