Accton Technology ES4626 - Manual (Page 320)

320
DHCP packets so that the DHCP packets exchange can be completed between the
DHCP client and server.
ES4624-SFP/ES4626-SFP switch can act as both a DHCP server and a DHCP relay.
DHCP server supports not only dynamic IP address assignment, but also manual IP
address binding (i.e. specify a specific IP address to a specified MAC address or
specified device ID over a long period. The differences and relations between dynamic IP
address allocation and manual IP address binding are: 1) IP address obtained
dynamically can be different every time; manually bound IP address will be the same all
the time. 2) The lease period of IP address obtained dynamically is the same as the lease
period of the address pool, and is limited; the lease of manually bound IP address is
theoretically endless. 3) Dynamically allocated address cannot be bound manually. 4)
Dynamic DHCP address pool can inherit the network configuration parameters of the
dynamic DHCP address pool of the related segment.
10.2 DHCP Server Configuration
10.2.1 DHCP Sever Configuration Task List
1. Enable/Disable DHCP server
2. Configure DHCP Address pool
(1) Create/Delete DHCP Address pool
(2) Configure DHCP address pool parameters
(3) Configure manual DHCP address pool parameters
3. Enable logging for address conflicts
1. Enable/Disable DHCP server
Command Explanation
Global Mode
service dhcp
no service dhcp
Enables DHCP server
2. Configure DHCP Address pool
(1) Create/Delete DHCP Address pool
Command Explanation
Global Mode
ip dhcp pool <name>
no ip dhcp pool <name>
Configures DHCP Address pool