Accton Technology ES4626 - Manual (Page 507)

507
13.7.5.1.9 show ipv6 ospf interface
Command: show ipv6 ospf interface [interface]
Function: Display the OSPF interface messages
Parameter: is the name of the interface
Default: Not displayed
Command Mode:
All modes
Example:
Loopback is up, line protocol is up
OSPFv3 not enabled on this interface
Vlan1 is up, line protocol is up
Interface ID 2003
IPv6 Prefixes
fe80::203:fff:fe01:257c/64 (Link-Local Address)
2001:1:1::1/64
OSPFv3 Process (*null*), Area 0.0.0.0, Instance ID 0
Router ID 192.168.2.2, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 192.168.2.2
Interface Address fe80::203:fff:fe01:257c
Backup Designated Router (ID) 192.168.2.3
Interface Address fe80::203:fff:fe01:d28
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:10
Neighbor Count is 1, Adjacent neighbor count is 1
Vlan2 is up, line protocol is up
Interface ID 2004
IPv6 Prefixes
fe80::203:fff:fe01:257c/64 (Link-Local Address)
2000:1:1::1/64
OSPFv3 Process (*null*), Area 0.0.0.0, Instance ID 0
Router ID 192.168.2.2, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Backup, Priority 1
Designated Router (ID) 192.168.2.1
Interface Address fe80::203:fff:fe01:429e
Backup Designated Router (ID) 192.168.2.2
Interface Address fe80::203:fff:fe01:257c
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:10