Accton Technology ES4626 - Manual (Page 781)

781
Click “Filter Configuration”, and then “Firewall Configuration” to enter the configuration
page. The detailed explanation is as follows:
z Packet filtering -”open” to enable or “close” to disable.
z Firewall default action -”accept” means to allow the packet to pass through and
“refuse” to deny the packet.
To enable or disable, users need to click “Apply” to confirm the command.
18.5.7 ACL port binding
Click “Filter configuration”, and then select “ACL port binding” to enter the configuration
page.
There are five items in this section.
z Port -the target port to bind to ACL
z ACL name -the target ACL name to bind
z Ingress/Egress -the target direction to bind
z Operation type -”Add” or “Remove”
To enable this function, you need to select the action in each item and then click “Apply”.