Accton Technology ES4626 - Manual (Page 182)

182
Switch(Config-Vlan100)#switchport interface ethernet 1/2-6
Switch(Config-Vlan100)#exit
Switch(Config)#interface Ethernet 1/11
Switch(Config-Ethernet1/11)#switchport mode trunk
Switch(Config-Ethernet1/11)# bridge-ext gvrp
Switch(Config-Ethernet1/11)#exit
Switch B:
Switch(Config)# bridge-ext gvrp
Switch(Config)#interface ethernet 1/10
Switch(Config-Ethernet1/10)#switchport mode trunk
Switch(Config-Ethernet1/10)# bridge-ext gvrp
Switch(Config-Ethernet1/10)#exit
Switch(Config)#interface ethernet 1/11
Switch(Config-Ethernet1/11)#switchport mode trunk
Switch(Config-Ethernet1/11)# bridge-ext gvrp
Switch(Config-Ethernet1/11)#exit
Switch C:
Switch(Config)# bridge-ext gvrp
Switch(Config)#vlan 100
Switch(Config-Vlan100)#switchport interface ethernet 1/2-6
Switch(Config-Vlan100)#exit
Switch(Config)#interface ethernet 1/11
Switch(Config-Ethernet1/11)#switchport mode trunk
Switch(Config-Ethernet1/11)# bridge-ext gvrp
Switch(Config-Ethernet1/11)#exit
VLAN Troubleshooting
The GARP counter setting in for Trunk ports in both ends of Trunk link must be the same,
otherwise GVRP will not work properly.It is recommended to avoid enabling GVRP and
RSTP at the same time in ES4624-SFP/ES4626-SFP switch. If GVRP is to be enabled,
RSTP function for the ports must be disabled first.
5.2.5 GVRP Troubleshooting
z The GARP counter setting in for Trunk ports in both ends of Trunk link must be the
same, otherwise GVRP will not work properly.It is recommended to avoid enabling
GVRP and RSTP at the same time in ES4624-SFP/ES4626-SFP switch. If GVRP is