Accton Technology ES4626 - Manual (Page 76)

76
no such name errors Number of packets requesting for
non-existent MIB objects.
bad values errors Number of “Bad_values” error SNMP
packets.
general errors Number of “General_errors” error SNMP
packets.
response PDUs Number of response packets sent.
trap PDUs Number of Trap packets sent.
2.4.3.3 show snmp status
Command: show snmp status
Function: Display SNMP configuration information.
Command mode: Admin Mode
Example:
Switch#show snmp status
Trap enable
RMON enable
Community Information:
V1/V2c Trap Host Information:
V3 Trap Host Information:
Security IP Information:
Displayed information Description
Community string Community string
Community access Community access permission
Trap-rec-address IP address which is used to receive Trap.
Trap enable Enable or disable to send Trap.
SecurityIP IP address of the NMS which is allowed
to access Agent
2.4.3.4 snmp-server community
Command: snmp-server community {ro|rw}
snmp-server community
Function: Configure the community string for the switch; the “no snmp-server
community “ command deletes the configured community string.
Parameter: is the community string set; ro|rw is the specified access mode to
MIB, ro for read-only and rw for read-write.