Accton Technology ES4626 - Manual (Page 111)

111
Command Explanation
Global Mode
sflow agent-address
no sflow agent-address
Configure the source IP address applied by
the sFlow proxy; the “no” form of the
command deletes this address.
3. Configure the sFlow proxy priority
Command Explanation
Global Mode
sflow priority
no sflow priority
Configure the priority when sFlow receives
packet from the hardware; the “no sflow
priority ” command restores to the default
4. Configure the packet head length copied by sFlow
Command Explanation
Global Mode
sflow header-len
no sflow header-len
Configure the length of the packet data
head copied in the sFlow data sampling;
the “no” form of this command restores to
the default value.
5. Configure the max data head length of the sFlow packet
Command Explanation
Interface Mode
sflow data-len
no sflow data-len
Configure the max length of the data
packet in sFlow; the “no” form of this
command restores to the default.
6. Configure the sampling rate value.
Command Explanation
Interface Mode
sflow rate { input | output
}
no sflow rate [input | output]
Configure the sampling rate when sFlow
performing hardware sampling. The “no”
command deletes the rate value.
7. Configure the Sflow statistic sampling interval
Command Explanation
Interface Mode
sflow counter-interval
no sflow counter-interval
Configure the max interval when sFlow
performing statistic sampling. The “no” form
of this command deletes
2.8.3 Commands for sFlow