1 show access-lists – Accton Technology ES4626 User Manual
Page 774
774
18.4.1.1 show access-lists
Command: show access-lists [
Functions:
Reveal ACL of configuration
Parameters:
, specific ACL name character string;
Default:
None
Command Mode:
Admin mode
Usage Guide:
When not assigning names of ACL, all ACL will be revealed, used x time
（
s）indicates the times of ACL to be used.
Examples:
Switch#show access-lists
access-list 10(used 0 time(s))
access-list 10 deny any
access-list 100(used 1 time(s))
access-list 100 deny ip any any-destination
access-list 100 deny tcp any any-destination
access-list 1100(used 0 time(s))
access-list 1100 permit any-source-mac any-destination-mac tagged-eth2 14 2 0800
access-list 3100(used 0 time(s))
access-list 3100 deny any-source-mac any-destination-mac udp any s-port 100
any-destination d-port 40000
Displayed information
Explanation
access-list 10(used 1 time(s))
Number ACL10, 0 time to be used
access-list 10 deny any
Deny any IP packets to pass
access-list 100(used 1 time(s))
Nnumber ACL10, 1 time to be used
access-list 100 deny ip any
any-destination
Deny IP packet of any source IP address
and destination address to pass
access-list 100 deny tcp any
any-destination
Deny TCP packet of any source IP
address and destination address to pass
access-list 1100 permit any-source-mac
any-destination-mac tagged-eth2 14 2
0800
Permit tagged-eth2 with any source MAC
addresses and any destination MAC
addresses and the packets whose 15
th
and 16
th
byte is respectively 0x08 , 0x0 to
pass
access-list 3100 permit any-source-mac
any-destination-mac udp any s-port 100
any-destination d-port 40000
Deny the passage of UDP packets with
any source MAC address and destination
MAC address, any source IP address and